PTFE GREENE Avalon 69Use performance

PTFE plastic materials, PTFE architectural membrane material. SOLUS such as TACONIC produced products have been widely used in large public facilities: the roof of the stadium, the airport hall, exhibition center, the site. The weight of the light weight it is only a small part of the conventional building materials
High strength glass fiber strength in textile fabrics, it is even better than the steel wire of the same diameter but also solid, flexibility and most solid building materials, soft Solus products can be stretched into a variety of dynamic arc shape. Uniform light transmittance of light transmission through the inner and outer surfaces, soft scattering light. Low maintenance the weaving lifespan, just do a very small amount of cleaning work. Because the weaving surface non-stick, but it is also a taut, so the rain will dust washed away. Surface is completely inert harsh environments, such as mold, acid rain, not weaving surface work. The weldability of each of the weaving frame will be welded together into one large ceiling. The weld strength will be greater than the weaving itself, the use of the long duration of the period of its use, PTFE-coated glass woven almost no degradation. The Currently, Solus weaving estimated to use at least 25 years of fire performance Solus weaving obtain a Class A fire protection assessment, and it remains a strong translucent
2, PTFE, in the application of anti-corrosion: defects due to rubber, glass, metal alloys and other materials in the corrosion resistance, it is difficult to meet the environment of coexistence of the harsh conditions of temperature, pressure and chemical mediators, thereby causing the loss of quite scared. PTFE material with its excellent corrosion resistance has become a major petroleum, chemical, textile and other industries corrosion-resistant materials. Specific applications include: high school low pressure pipeline pipeline conveying corrosive gas, exhaust pipes, steam pipes, rolling mill, high pressure tubing, aircraft hydraulic system and cold system, distillation columns, heat exchanger, kettle, tower, trough lining, valves, chemical equipment. The seal performance good or bad has a great impact on the efficiency and performance of the entire machinery and equipment. PTFE material with corrosion-resistant, anti-aging, low friction coefficient and not sticky, wide temperature range, good flexibility makes it very suitable for the manufacture of corrosion resistant requirements of high use temperature higher than 100 ° C seals. Such machines, heat exchangers, pressure vessels, large diameter containers, valves, pumps, a grooved flange seal glass Fanyingguo, a flange, the seal member of the large diameter flange, the shaft, the piston rod, the valve rod, The worm pump, rod seals.
  Polytetrafluoroethylene PTFE low friction performance of the application of a load: Because some devices the friction parts should not be lubricated, such as failure in grease solvent dissolved of occasions or paper, pharmaceutical, food, textile and other industries ideal material for products in the field need to avoid lubricant contamination, filled PTFE material to become mechanical equipment parts without oil lubrication (loads). This is because the coefficient of friction of the material is known with the solid material in the lowest. Its specific uses, including for chemical equipment, paper machinery, agricultural machinery bearings, used as piston rings, machine tool guide, guide ring; widely used as bridges, tunnels, steel roof trusses, large chemical pipelines, storage tanks in Civil Engineering bearing slide, as well as used as a bridge support and bridging twist.
4, Teflon PTFE in Electrical and Electronic Applications: PTFE material inherent low loss and a small dielectric constant so that it can be made of enameled wire for the micro-motor, thermocouple, control device; PTFE films are manufactured capacitor indispensable material one radio insulating spacer, insulated cables, motors and transformers, the ideal insulation material, aerospace and other industrial electronic component; using fluorine plastic film oxygen permeability large, while the water vapor permeability small this ｓｅｌｅｃｔive permeability, the oxygen sensor can be manufactured; using fluorine plastic extremely deviates to the charge characteristics of the phenomenon occurs in the high temperature and pressure, can produce a microphone, speakers, on the robot parts, etc.; the use of a low refractive index characteristic can be manufactured optical fiber. Technology continues to evolve, three disadvantages: cold flow of PTFE material, difficult weldability, difficult to melt processability is gradually being overcome, making it in a variety of areas of optical, electronic, medical, petrochemical and oil seepage more broad application prospects.

PTFE	GREENE		Avalon 09
PTFE	GREENE		Avalon 11
PTFE	GREENE		Avalon 69
PTFE	GREENE		Avalon 89
PTFE	GREENE		Avalon 92

Key Words：Avalon 69，PTFE Avalon 69，GREENE Avalon 69