PA TP Lubriblend PPA CF30 TL15Use performance
PA has performance characteristics: high mechanical strength, good toughness, high tensile and compressive strength. Than the tensile strength higher than that of metals, than the compression strength and the metal comparable, but less rigidity than the metal. Close to the yield strength, tensile strength more than twice as high than ABS. Impact stress vibration absorption capacity, impact strength higher than the average plastic, and better than the acetal resin. 2. Outstanding fatigue resistance, the parts by repeatedly inflected still maintain the original mechanical strength. The common escalator handrails, new bicycle plastic rims cyclical fatigue effects blatant occasions often applied PA. 3 high softening point, and heat (such as nylon 46, etc., and highly crystalline nylon high heat distortion temperature, can be long-term use at 150 degrees. PA66 through glass fiber reinforced, the heat distortion temperature of 250 degrees or more). Smooth surface, low coefficient of friction, wear-resistant. For active mechanical components have self-lubricating, low noise, lubricant use may increase the friction effect is not too high; If you do need to use lubricant in order to reduce friction or help dissipate heat, water and oil, grease, are optional. Thereby, as a transmission member, its long life. 5. Corrosion resistant, very alkaline and most of the salt solution, and is also resistant to weak acids, oil, gasoline, resistance to aromatic compounds and general solvents, inert to the aromatic compound, but does not resistance to strong acids and oxidizing agents. Can withstand gasoline, oil, fat, alcohol, and in the weak alkaline erosion and has a good aging resistance. Can be used for the packaging of lubricants, fuels and other materials. Self-extinguishing, non-toxic, odorless, good weather resistance, inert biological erosion, antibacterial and antifungal capacity. 7 have excellent electrical properties. Good electrical insulating properties, the volume resistivity of the nylon high resistance, high breakdown voltage, in a dry environment, can workmanship frequency insulation material still has good electrical insulating properties, even in a high humidity environment. 8 parts by weight of light, easy to stain, easy molding. Due to have a lower melt viscosity, can quickly flow. Easy mold filling, filling high freezing point, quickly stereotypes, the molding cycle is short, high production efficiency. 9 having a good tensile strength, impact resistance strength, rigidity, abrasion resistance, chemical resistance, surface hardness and other properties, high transmittance, and close to the optical glass, the processing temperature is 300 - 315 ° C, the molding processability barrel temperature should be strictly controlled, high melt temperature degradation products discoloration, the temperature is too low will affect the transparency of the products of plastics bad. Mold temperature as far as possible to take the low mold temperature will lower the transparency of the article leaving due to crystallization.
| PA |
TP |
Lubriblend |
PPA CF30 TL15 |
Key Words：PPA CF30 TL15，PA PPA CF30 TL15，PPA CF30 TL15，TP PPA CF30 TL15