PA6/12 PolyOne Stat-Tech CTX-20SS 107/000Use performance
PA6 milky white or slightly yellow transparent to opaque skin-like crystalline polymer, free coloring, toughness, wear resistance, self-lubricating, rigidity, low temperature resistance, bacterial resistance, the slow burn slower from the fire put out, dripping, blistering, excellent moldability: injection molding, blow molding, pour molding, spraying, powder molding, machining, welding, bonding. PA6 is the highest water absorption PA, poor dimensional stability, and affect the electrical properties (breakdown voltage). PA6 maximum operating temperature up to 180 ° C, plus the impact modifier will be reduced to 160 ° C, with 15% to 50% glass fiber reinforced, can be increased to 199 ° C, the inorganic filler PA can improve the heat distortion temperature.
Physical properties; the PA6 chemical physical characteristics and PA66 are similar, however, its low melting point, and the process temperature range is very wide. Its impact resistance and anti-solubility is better than the PA66, but also more moisture. Because many quality characteristics of plastic parts will be subject to the effects of moisture absorption, PA6 design products to take full account of this in mind. In order to improve the mechanical properties of PA6 plastic materials, often by adding various modifiers. Glass is the most common additives, sometimes in order to improve the impact resistance of elastomers such as EPDM and SBR. For products without additives, PA6 contraction rate of between 1% to 1.5%. The molding shrinkage assembled mainly by crystalline material and moisture absorption. The actual shrinkage and plastic parts design, wall thickness and other process parameters as a function of.
Range of industrial applications; polyamide glass fiber reinforced materials according to the characteristics of the product requires the addition of glass content in the 5-60% range, these materials have good strength, heat resistance, excellent impact resistance, good dimensional stability and low warpage. In order to meet the requirements of the industrial area, reinforced polyamide materials should have the following requirements: 1) excellent strength and durability, excellent rigidity and heat resistance of the combination. 2) Excellent color performance, the perfect surface appearance, can be applied to complex structures forming, and help design and development to develop new styling products. 3) good workability, excellent mobility and thermal stability of the material processing conditions become more relaxed, the miniaturization of the injection molded parts. 4) high thermal stability, wave soldering up to 270 degrees is not linked to tin.
| PA6/12 |
PolyOne |
Stat-Tech |
CTX-20SS 107/000 |
Key Words：CTX-20SS 107/000，PA6/12 CTX-20SS 107/000，Stat-Tech CTX-20SS 107/000，PolyOne CTX-20SS 107/000